Consumer Pressure Washers

 

Our Great selection of Equipment ranges from various brands and features like key start Engines. Browse friendly website to choose your preferred option starting at $379.99

Phone: 833.400.0774

Español: 800.917.9274

Read More

Restoring a pool using a pressure washer

 

Restoring a pool using a pressure washer involves a number of steps, including cleaning the pool surface, removing stains, and addressing any structural issues. Here is a general guide on how to use a pressure washer to restore a pool:

1. Remove all debris, such as leaves and twigs, from the pool using a skimmer or pool net.

2. Drain the water level to a level that is comfortable to work with, usually a little above the tile line

3. Test the pH and chlorine levels and adjust as necessary to ensure the pool is safe for cleaning.

4. Put on personal protective equipment, including eye and ear protection, slip-resistant footwear and gloves.

5. Apply a mild detergent or pool surface cleaner to the pool surface and allow it to sit for a few minutes.

6. Use a pressure washer with a low-pressure nozzle and a wide spray pattern to gently wash the pool surface and remove dirt and stains.

7. Use a medium-pressure nozzle to clean away tougher stains and mildew from tile lines, surfaces and concrete surfaces.

8. Make sure the pressure washer is not too close to the surface to avoid damaging the surface.

9. Rinse the pool surface thoroughly with clean water to remove any remaining detergent or cleaning solution.

10. Inspect the pool for any structural issues, such as leaks or cracks, and address them as necessary.

11. Refill the pool with water and adjust the pH and chlorine levels as necessary

12. Turn on the filtration system and let it run for 24 hours.

It's important to be familiar with the type of pool surface and any specific cleaning needs, as certain types of surfaces may require different pressure settings or cleaning solutions. Consult your pool manufacturer for the recommended cleaning procedures and use only pool safe cleaning products.

Phone: 833.400.0774

Español: 800.917.9274

Restauración de una piscina con una hidrolavadora

La restauración de una piscina con una lavadora a presión implica una serie de pasos, incluida la limpieza de la superficie de la piscina, la eliminación de manchas y el tratamiento de cualquier problema estructural. Aquí hay una guía general sobre cómo usar una lavadora a presión para restaurar una piscina:

1. Retire todos los desechos, como hojas y ramitas, de la piscina con una espumadera o una red para piscinas.

2. Drene el nivel del agua a un nivel que sea cómodo para trabajar, generalmente un poco por encima de la línea del azulejo

3. Pruebe los niveles de pH y cloro y ajústelos según sea necesario para garantizar que la piscina sea segura para la limpieza.

4. Póngase equipo de protección personal, incluyendo protección para ojos y oídos, calzado antideslizante y guantes.

5. Aplique un detergente suave o un limpiador de superficies de piscinas a la superficie de la piscina y déjelo reposar durante unos minutos.

6. Use una lavadora a presión con una boquilla de baja presión y un patrón de rociado ancho para lavar suavemente la superficie de la piscina y eliminar la suciedad y las manchas.

7. Use una boquilla de presión media para limpiar las manchas más difíciles y el moho de las líneas de baldosas, las superficies y las superficies de concreto.

8. Asegúrese de que la lavadora a presión no esté demasiado cerca de la superficie para evitar dañar la superficie.

9. Enjuague bien la superficie de la piscina con agua limpia para eliminar cualquier resto de detergente o solución de limpieza.

10. Inspeccione la piscina en busca de problemas estructurales, como fugas o grietas, y resuélvalos según sea necesario.

11. Vuelva a llenar la piscina con agua y ajuste los niveles de pH y cloro según sea necesario

12. Encienda el sistema de filtración y déjelo funcionar durante 24 horas.

Es importante estar familiarizado con el tipo de superficie de la piscina y las necesidades específicas de limpieza, ya que ciertos tipos de superficies pueden requerir diferentes configuraciones de presión o soluciones de limpieza. Consulte al fabricante de su piscina para conocer los procedimientos de limpieza recomendados y use solo productos de limpieza seguros para piscinas.

Read More

50 applications for All Pressure Washers

 All pressure Washers

1. Cleaning large surfaces, such as decks, patios, and driveways
2. Removing dirt and grime from exterior walls
3. Cleaning cars and other vehicles
4. Cleaning outdoor furniture
5. Removing mold and mildew from exterior surfaces
6. Removing oil and grease stains from driveways and garage floors
7. Cleaning gutters and downspouts
8. Cleaning and restoring wood decks and fences
9. Removing graffiti
10. Cleaning windows and screens
11. Cleaning pool decks and patio areas
12. Cleaning and restoring brick and stone surfaces
13. Cleaning commercial equipment and machinery
14. Cleaning and restoring wooden decks and fences
15. Removing paint from surfaces
16. Removing chewing gum from sidewalks and streets
17. Cleaning and restoring concrete surfaces
18. Removing rust and corrosion from metal surfaces
19. Cleaning and restoring roofs
20. Cleaning and restoring tile and grout
21. Cleaning and restoring HVAC units
22. Cleaning and restoring boats and watercraft
23. Cleaning and restoring RVs and trailers
24. Cleaning and restoring solar panels
25. Cleaning and restoring playground equipment
26. Cleaning and restoring fences and gates
27. Removing stains and marks from surfaces
28. Cleaning and restoring flagstones and pavers
29. Cleaning and restoring awnings and canopies
30. Cleaning and restoring equipment and machinery
31. Cleaning and restoring statues and sculptures
32. Cleaning and restoring golf carts and ATVs
33. Cleaning and restoring decks and docks
34. Cleaning and restoring sidewalks and walkways
35. Cleaning and restoring commercial and industrial equipment
36. Cleaning and restoring natural stone surfaces
37. Cleaning and restoring vinyl and aluminum siding
38. Cleaning and restoring retaining walls
39. Cleaning and restoring decks and docks
40. Cleaning and restoring playground equipment
41. Cleaning and restoring parking lots and garages
42. Cleaning and restoring commercial and industrial vehicles
43. Cleaning and restoring curb appeal
44. Removing dirt and grime from outdoor surfaces
45. Preparing surfaces for painting or staining
46. Cleaning and restoring historic buildings
47. Cleaning and restoring commercial and industrial buildings
48. Cleaning and restoring equipment and machinery
49. Cleaning and restoring monuments and landmarks
50. Cleaning and restoring commercial and industrial equipment and machinery.

Call us at: 833.400.0774
Español: 800.917.9274

 

1. 
   
   

Read More

Restoring a pool using a pressure washer

 Restoring a pool using a pressure washer involves a number of steps, including cleaning the pool surface, removing stains, and addressing any structural issues. Here is a general guide on how to use a pressure washer to restore a pool:

1. Remove all debris, such as leaves and twigs, from the pool using a skimmer or pool net.

2. Drain the water level to a level that is comfortable to work with, usually a little above the tile line.

3. Test the pH and chlorine levels and adjust as necessary to ensure the pool is safe for cleaning.

4. Put on personal protective equipment, including eye and ear protection, slip-resistant footwear and gloves.

5. Apply a mild detergent or pool surface cleaner to the pool surface and allow it to sit for a few minutes.

6. Use a pressure washer with a low-pressure nozzle and a wide spray pattern to gently wash the pool surface and remove dirt and stains.

7. Use a medium-pressure nozzle to clean away tougher stains and mildew from tile lines, surfaces and concrete surfaces.

8. Make sure the pressure washer is not too close to the surface to avoid damaging the surface.

9. Rinse the pool surface thoroughly with clean water to remove any remaining detergent or cleaning solution.

10. Inspect the pool for any structural issues, such as leaks or cracks, and address them as necessary.

11.Refill the pool with water and adjust the pH and chlorine levels as necessary.

12.  Turn on the filtration system and let it run for 24 hours.

It's important to be familiar with the type of pool surface and any specific cleaning needs, as certain types of surfaces may require different pressure settings or cleaning solutions. Consult your pool .

#pressurewashers #powercleaning #powerwashing #pressurewashing #concrete #heavyequipment

Read More

How to clean a gutter with a pressure washer and attachments

 To clean a gutter with a All Pressure Washer, you will need a pressure washer with adjustable pressure settings, a telescopic wand, and a gutter cleaning attachment.

1. By extending the telescopic wand climb to the level of the gutters so you can spray the gutters safely from the ground. Avoid the need for a ladder.

2. Set the pressure washer to a lower PSI setting, and attach the gutter cleaning attachment to the nozzle.

3. Begin at one end of the gutter and hold the nozzle at a slight angle, pointing it towards the downspout to force debris in that direction.

4. Slowly move the nozzle along the gutter, keeping the nozzle pointed towards the downspout.

5. Repeat the process for each section of the gutter, being sure to empty the debris from the gutter as you go.

6. Once you have cleaned the gutters, use the Water Cannon pressure washer to flush out the downspouts to ensure that they are clear of debris.

It's important to keep in mind that pressure washers can be dangerous, so always be sure to follow the manufacturer's instructions and use caution when working at height. It's a good idea to have someone assist you while you are working, and to wear appropriate safety gear.

Phone: 833.400.0774

Espanol: 800.917.9274

 

Read More